Electronic Ignition for 4AD ?
- Mark Thompson
- Posts: 196
- Joined: Thu Nov 17, 2005 8:51 pm
- First Name: Mark
- Location: Nashville, TN
Re: Electronic Ignition for 4AD ?
Paul,
I sincerely appreciate your interest and willingness to work on this project for Singer ignition systems. I am sure you would deliver a quality product that would perform well. My feeling is that most of our members that are running stock 4AD engines would want to keep the engine looking as original as possible. I have kept our correspondence on this website, instead of e-mail or phone, so that other members could have input. If I am wrong, I wish some members would speak up. I would be glad to assist anyone in moving this project forward, but I don't feel it would be profitable for you. I can probably locate a distributor for you to work with if there is still interest out there.
Best Regards,
Mark Thompson
I sincerely appreciate your interest and willingness to work on this project for Singer ignition systems. I am sure you would deliver a quality product that would perform well. My feeling is that most of our members that are running stock 4AD engines would want to keep the engine looking as original as possible. I have kept our correspondence on this website, instead of e-mail or phone, so that other members could have input. If I am wrong, I wish some members would speak up. I would be glad to assist anyone in moving this project forward, but I don't feel it would be profitable for you. I can probably locate a distributor for you to work with if there is still interest out there.
Best Regards,
Mark Thompson
-
- Posts: 9
- Joined: Thu Aug 22, 2013 3:12 am
- First Name: Paul
- Location: Appleton, Wisconsin, USA
- Contact:
Re: Electronic Ignition for 4AD ?
I was told there are not many Singer cars left, but since the distributor is shared with other vehicles, we could start a group project covering all the models that could use them.
So far i haven't seen anyone else who wants one for a Singer, so maybe these cars start and run good and don't need upgrades.
As you saw from the pictures, we can keep it looking "mostly" stock, and since you don't drive around with the hood up, the benefits of instant starting, less oil burning, mileage and power improvements, and no maintenance should be incentive enough (in my mind) to give one a try.
How do i get these posts to show up via email? Can i make an adjustment on my profile to send me a notice? I'll leave an offer on the table...if anyone wants to work with us on a kit, i am all for giving it a go. My email is paul@c5ignitions.com
Take care for now.
So far i haven't seen anyone else who wants one for a Singer, so maybe these cars start and run good and don't need upgrades.
As you saw from the pictures, we can keep it looking "mostly" stock, and since you don't drive around with the hood up, the benefits of instant starting, less oil burning, mileage and power improvements, and no maintenance should be incentive enough (in my mind) to give one a try.
How do i get these posts to show up via email? Can i make an adjustment on my profile to send me a notice? I'll leave an offer on the table...if anyone wants to work with us on a kit, i am all for giving it a go. My email is paul@c5ignitions.com
Take care for now.
- Mark Thompson
- Posts: 196
- Joined: Thu Nov 17, 2005 8:51 pm
- First Name: Mark
- Location: Nashville, TN
Re: Electronic Ignition for 4AD ?
Today, I installed a Pertronix electronic ignition module in my 1952 4AD to replace the points & condenser. My distributor is a Lucas DKY4A # 40167. I used Part No. LU-146LSP12 from O'Reilly's Auto Parts for about $160 including shipping. It can also be ordered directly from Pertronix using their online store. The module included a rotor that is slightly shorter than the original to allow clearance over the module. It was a simple installation and is barely discernible from outside the distributor. It did require cutting the condenser off the baseplate to make room for the module. That was no problem as I had an assortment of old condenser baseplates. The car runs and idles very smoothly. Tomorrow, I will take it for a test drive and I will keep everyone posted if I encounter any problems.
Hopefully, I'll never have to replace points or condensers again.
Happy Singering!
Mark Thompson
Hopefully, I'll never have to replace points or condensers again.
Happy Singering!
Mark Thompson
Last edited by Mark Thompson on Fri Feb 14, 2014 1:19 am, edited 1 time in total.
- Mark Thompson
- Posts: 196
- Joined: Thu Nov 17, 2005 8:51 pm
- First Name: Mark
- Location: Nashville, TN
Re: Electronic Ignition for 4AD ?
Put a hundred miles on my car yesterday. 90 degrees outside and ran great with no stalling! I'm pleased.
Best Regards,
Mark Thompson
1952 4AD
Best Regards,
Mark Thompson
1952 4AD
Re: Electronic Ignition for 4AD ?
Mark,
This is not to derail your exploring of this wonderful new technology, but your original question was asking who had tried electronic ignition, so I will jump in. I installed the Pertronix ignition in my 4A with 1074cc. perhaps nearly 10 years ago. I believe the Pertronix man had not done a 4A previously so I sent him my distributor (with no vacuum advance) and he sent it back with the kit installed. In my case, there was no difference in performance between running points and the Pertronix, just an improvement in maintenance. And I retained the Lucas Sports coil rather than the Pertronix Flame Thrower coil.
I have heard a few stories about sudden unexpected failures of electronic ignition, probably in a most inconvenient location, but mine have served well so far. Just keep a points plate in the trunk.
Bil
This is not to derail your exploring of this wonderful new technology, but your original question was asking who had tried electronic ignition, so I will jump in. I installed the Pertronix ignition in my 4A with 1074cc. perhaps nearly 10 years ago. I believe the Pertronix man had not done a 4A previously so I sent him my distributor (with no vacuum advance) and he sent it back with the kit installed. In my case, there was no difference in performance between running points and the Pertronix, just an improvement in maintenance. And I retained the Lucas Sports coil rather than the Pertronix Flame Thrower coil.
I have heard a few stories about sudden unexpected failures of electronic ignition, probably in a most inconvenient location, but mine have served well so far. Just keep a points plate in the trunk.
Bil
-
- Posts: 9
- Joined: Thu Aug 22, 2013 3:12 am
- First Name: Paul
- Location: Appleton, Wisconsin, USA
- Contact:
Re: Electronic Ignition for 4AD ?
Here is a Kawasaki W1 kit we just created. It's the only one right now, but the gentleman owns 5-6 and wants this on every one.
He didnt send the cap, but look at how it fits down into the distributor so people wont know its there.
Multi sparking is the best invention...lol. It starts better, idles better, and gains 10-20% more "rear wheel" power on every dyno run I've ever done.
Pertronix kits are not bad, but they will not increase power or improve operation over points. It's a great upgrade to eliminate points though!
I'm just going to keep teasing you until someone orders a kit. After that, everyone will want one (I hope).
Have a great week gentleman.
He didnt send the cap, but look at how it fits down into the distributor so people wont know its there.
Multi sparking is the best invention...lol. It starts better, idles better, and gains 10-20% more "rear wheel" power on every dyno run I've ever done.
Pertronix kits are not bad, but they will not increase power or improve operation over points. It's a great upgrade to eliminate points though!
I'm just going to keep teasing you until someone orders a kit. After that, everyone will want one (I hope).
Have a great week gentleman.
-
- Posts: 9
- Joined: Thu Aug 22, 2013 3:12 am
- First Name: Paul
- Location: Appleton, Wisconsin, USA
- Contact:
Re: Electronic Ignition for 4AD ?
I have two people interested in our ignition kit. Perhaps a few others might be lurking in the shadows? If we are going to design a kit for the Singer, now is the time. Spring and Summer are very busy for us. Hopefully everyone has a nice shoveled path to their garage and projects are getting done. I am throwing in a teaser pic. We just finished up the Oldsmobile project and I think it really turned out great. Take care gentlemen!!
Paul Crowe
Paul Crowe
-
- Posts: 46
- Joined: Mon Aug 19, 2013 9:11 pm
- First Name: Louis
- Location: Modesto, California, USA
Re: Electronic Ignition for 4AD ?
Mark could you post a picture of the installation of your new Pentronix electronic ignition module? It would help me understand how it works.
Thanks, Louis
Thanks, Louis
- Mark Thompson
- Posts: 196
- Joined: Thu Nov 17, 2005 8:51 pm
- First Name: Mark
- Location: Nashville, TN
Re: Electronic Ignition for 4AD ?
Louis,
Give me a day or two and I will beglad to take some pictures. I will try to post them, but I haven't had much success in the past with posting pictures in the past. send me your e-mail address and I will be sure that you get them. I will try to post them to share with others.
Best Regards,
Mark Thompson
Give me a day or two and I will beglad to take some pictures. I will try to post them, but I haven't had much success in the past with posting pictures in the past. send me your e-mail address and I will be sure that you get them. I will try to post them to share with others.
Best Regards,
Mark Thompson
Last edited by Mark Thompson on Wed Feb 19, 2014 5:53 pm, edited 1 time in total.
-
- Posts: 46
- Joined: Mon Aug 19, 2013 9:11 pm
- First Name: Louis
- Location: Modesto, California, USA
Re: Electronic Ignition for 4AD ?
Mark: My address is Louis_levin at yohoo dot com replace the at with the @ and the dot with a . I do it that way so no automatic hacker can get my address.
Thanks for helping out.
Thanks for helping out.
- Mark Thompson
- Posts: 196
- Joined: Thu Nov 17, 2005 8:51 pm
- First Name: Mark
- Location: Nashville, TN
Re: Electronic Ignition for 4AD ?
Just as I thought the photo files were too large to post here. I will e-mail them to you. I have this problem every time that I try. Mike has helped me in the past. Maybe there is some way Mike can post directions on the forum that would be readily available to incompetent people like me.
Best Regards,
Mark Thompson
Best Regards,
Mark Thompson
- mikeyr
- Site Admin
- Posts: 1347
- Joined: Thu Nov 17, 2005 10:20 am
- First Name: Mike
- Location: S. Calif.
- Contact:
Re: Electronic Ignition for 4AD ?
you need to resize your pictures, I will write up some instructions....
Mike Rambour. Site Administrator
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
- William Howerth
- Posts: 20
- Joined: Mon Mar 02, 2009 7:55 pm
- First Name: William
- Location: Port Charlotte FL
- Contact:
Re: Electronic Ignition for 4AD ?
I have run a positive ground Pertronix in my Singer4AD for three years now with no issues. My Mustang is a different story, they only seem to last about a year and a half but that is a very high performance motor. I switched to a Mallory in that one. Back to the Singer, use the Pertronix, buy two. Put one in the distributor and one in the glove box. Car idles better and runs smoother too.
Re: Electronic Ignition for 4AD ?
I know this is an old thread, and hope your still an active member. But would you have a part number on this Pertronix item ? And would it work on my 52 L4AD ?William Howerth wrote: ↑Wed Apr 16, 2014 8:06 pm I have run a positive ground Pertronix in my Singer4AD for three years now with no issues. My Mustang is a different story, they only seem to last about a year and a half but that is a very high performance motor. I switched to a Mallory in that one. Back to the Singer, use the Pertronix, buy two. Put one in the distributor and one in the glove box. Car idles better and runs smoother too.
52 Singer 4AD
Re: Electronic Ignition for 4AD ?
Or anyone's input would be nice also. My mechanic friend thinks going with electronic ignition is the way to go with my restore. I've only tried "The Distributor Doctor" in the UK so far. And his price is about $200. in USD, and that doesn't even include the rotor or cap.
52 Singer 4AD