Web Forum for Singer Cars

I finally got the mold done for the transmission cover for my 4AD. I had one part made to make sure it would work and if it could be installed. With some modification to the installation process, I think it worked out well. I used my old cover to make the mold so the finished part is a copy of mine with all the blemishes. Not sure what Singer Roadster models it will fit . I can have these made localy so if anyone is interested contact me directly at 1953singer@gmail.com for the details. I could not get a picture to download here so you will have to email me.

thanks

steve

**** EDIT BY MIKE **** added the pictures (by the way for future reference the pictures were too large to upload as there is a size limit)

This LOOKS GOOD ! should fit ALL 4AD's Click on the pictures for a larger image

Nice job Steve!

It will also fit the 4A, 4AB and 4AC ( not many of those about! ) as well as the 4AD.

I assume it is fibre-glass??

FYI, I have a sample of the earlier type as fitted to the A Series, 46 to 49, with the three speed box if anyone wants photos as a reference.

Cheers,
Phillip

Hello Phillip

I would like photos of the earli type transmission cover.
Egholt@adr.dk

Regards Michael

The part is fiberglass, with a black gel-coat. The one in the picture is painted. If you have any other questions, let me know.

thanks

Steve
I could use one of those covers. I sent you a personal email.
Thanks

Sorry but I did not get the email you sent, give it a try again. Put Transmission Cover in the subject line. I will check the junk filter and see if it is in there.

thanks

steve

As stated in my email to you great work with making this part available to us and I am looking forward to installing one of these in my car.

Hi Steve .. are you still making the transmission covers out of fibreglass .. Regards Stephen