Web Forum for Singer Cars

I believe I was told/read that the 4AD front wheel cylinders were common to the Austin-Healy 100-4, but I can't recall my source. Can someone confirm this and also whether to use the front or rear A-H cylinders?

on another post I saw a reference to an interchange list. Is this posted on the NASOC site somewhere?

Steve

Well I found my source (see note below) and am replying to my own post. Isn't that a bit like talking to yourself?


The brake cylinder are availible from Moss Motors they are Austin Healy
100-4 L/Side 021-144, R/S 021-147 the kit is girling # SP2049. The metal (suspension) bushings can be gotten from Bill Haverly as well as the front brake shoes.
He is listed in the NewsFlash pull out section in Nasoc News. The rubber bushings can be gotten from Moss Motors these fit the ft end and the rear shackle bushes 16 for the front and 12 for the rear part number is 282-848.
Dave Green
NASOC Treasurer & Parts Guy


thanks again, Dave, for the info.

yes it is like talking to yourself...

Moss also has brand new wheel cylinders if you have the cash, they were $20 when I bought them last now they are $83 each and you need 4 of them.

You are still okay if you talk to yourself,& answer yourself. But watch out if you say HUH? Then its time for help!
BRG