Roadster owners manual has a picture showing the wiring loom routing and connections with chassis. This picture shows right hand dirive chassis where the wiring loom from front to rear lights go along the right chassis beam. Is this the correct routing for left hand drive car also or do they have the loom routed along the left beam. That would make sense since the brake light light switch is on left.
BR/
Pekka
4AD Wiring loom routing
4AD Wiring loom routing
4ADT Roadster, 1954 --- http://www.guru-group.fi/kabu/singer
-
Paul Bouchard
- Posts: 414
- Joined: Thu Nov 17, 2005 9:35 pm
- First Name: Paul
- Location: Deux-Montagnes, Quebec, Canada
- Contact:
Re: 4AD Wiring loom routing
Kabu,
In the 4AD manual that I have on file, there is a graphic showing the wiring running along the left side.
In the 4AD manual that I have on file, there is a graphic showing the wiring running along the left side.
- Attachments
-
-
-
Paul Bouchard
President, NASOC
Nine Roadster Registrar
1948 A Series Roadster
1947 Super Ten Saloon
1935 Le Mans Super Speed Model
Just enjoying the ride.
President, NASOC
Nine Roadster Registrar
1948 A Series Roadster
1947 Super Ten Saloon
1935 Le Mans Super Speed Model
Just enjoying the ride.
Re: 4AD Wiring loom routing
Excellent! Thank you Paul. So they did make separate versions of the owners manual for RHD and LHD countries. I have only a copy of an RHD manual.
BR/
Pekka
BR/
Pekka
4ADT Roadster, 1954 --- http://www.guru-group.fi/kabu/singer
Re: 4AD Wiring loom routing
To avoid a new topic about the same question: is this the same as on the RHD 4A cars?
Or is it just a mirror way of mounting?
I got the new wiring from Autosparks, it looks nice, almost to good to put it away in a corner from the chassis....
Or is it just a mirror way of mounting?
I got the new wiring from Autosparks, it looks nice, almost to good to put it away in a corner from the chassis....
Singer 4A 1950