Page 1 of 1
4ADT clutch arm/pedal chatter
Posted: Mon Jan 09, 2023 10:23 pm
by Grantbradley
My clutch arm and pedal make quite a noise when the clutch pedal is fully released.
Put slight pressure on the pedal and the chatter stops.
The throwout bearing is new and the arm appeared good. Thoughts?
Thank you
Re: 4ADT clutch arm/pedal chatter
Posted: Tue Jan 10, 2023 4:15 pm
by mikeyr
Can you identify where the noise is coming from ? meaning inside the bell housing or at the arm itself ? it is possible the arm has too much slop at the pivot point and causing a rattle. The fact that when you put the clutch in the noise stops, implies its not the throwout bearing.
Re: 4ADT clutch arm/pedal chatter
Posted: Tue Jan 10, 2023 10:21 pm
by Grantbradley
I am wondering if my clutch return spring is too strong and is pulling the arm back off of the pivot?