new body in the works
- mikeyr
- Site Admin
- Posts: 1347
- Joined: Thu Nov 17, 2005 10:20 am
- First Name: Mike
- Location: S. Calif.
- Contact:
new body in the works
ok, so this is boring to all of you who have done this before...but exciting to me. The skeletal beginnings.
Mike Rambour. Site Administrator
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
Re: new body in the works
Ooo! lovely puzzle.
- Peter McKercher
- Posts: 1074
- Joined: Sun Nov 27, 2005 4:26 am
- First Name: Peter
- Location: Ontario, Canada
- Contact:
Re: new body in the works
Looks like it will be coming in next week. Are you going Ikea flat pack or fully assembled?
Peter McKercher
Vice President - NASOC
Pre war Singer Specialist and Collector
Automotive Historian
Author of "Racing Roadsters"
Vice President - NASOC
Pre war Singer Specialist and Collector
Automotive Historian
Author of "Racing Roadsters"
- mikeyr
- Site Admin
- Posts: 1347
- Joined: Thu Nov 17, 2005 10:20 am
- First Name: Mike
- Location: S. Calif.
- Contact:
Re: new body in the works
While I do think assembling the puzzle would be fun, I am going for fully assembled.
Mike Rambour. Site Administrator
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
- mikeyr
- Site Admin
- Posts: 1347
- Joined: Thu Nov 17, 2005 10:20 am
- First Name: Mike
- Location: S. Calif.
- Contact:
Re: new body in the works
Ok, progress...major progress
At the speed at which Colin works, I think I need to invite him over to my house to prep my chassis, the body will be ready before the chassis is
This also serves as a test to see if the new forum software works with images
At the speed at which Colin works, I think I need to invite him over to my house to prep my chassis, the body will be ready before the chassis is
This also serves as a test to see if the new forum software works with images
Mike Rambour. Site Administrator
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
Re: new body in the works
What a nice jigsaw puzzle. Looking good
Singer Nine Sports 1933 and MGA 1600 mk2 1961
- mikeyr
- Site Admin
- Posts: 1347
- Joined: Thu Nov 17, 2005 10:20 am
- First Name: Mike
- Location: S. Calif.
- Contact:
Re: new body in the works
NOW this is getting exciting. Unfortunately life has thrown me a curve, my daughter is moving at the end of the month, so guess who has to help her ? yup, me !! And the new place she is moving to will need lots of work, yard is disaster, but house is pretty "blah" and will need termite repairs, so less time to prep my chassis, but the Mini will be out of my garage and in a new garage to make room for my Singer so there is a benefit.
It looks almost done !!! measured my windshield and gave him the dimensions, they all differ in width a tiny bit he said.
It looks almost done !!! measured my windshield and gave him the dimensions, they all differ in width a tiny bit he said.
Mike Rambour. Site Administrator
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
- mikeyr
- Site Admin
- Posts: 1347
- Joined: Thu Nov 17, 2005 10:20 am
- First Name: Mike
- Location: S. Calif.
- Contact:
Re: new body in the works
NOW this is getting exciting. Unfortunately life has thrown me a curve, my daughter is moving at the end of the month, so guess who has to help her ? yup, me !! And the new place she is moving to will need lots of work, yard is disaster, and house is pretty "blah" and will need termite repairs, so less time to prep my chassis, but the Mini will be out of my garage and in a new garage to make room for my Singer so there is a benefit.
It looks almost done !!! measured my windshield and gave him the dimensions, they all differ in width a tiny bit he said.
It looks almost done !!! measured my windshield and gave him the dimensions, they all differ in width a tiny bit he said.
Mike Rambour. Site Administrator
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
-
- Posts: 73
- Joined: Wed Jun 06, 2007 7:46 pm
- First Name: Steve
- Location: SW Iowa, USA
Re: new body in the works
Looks great Mike. Life always intervenes but its lovely to have such a good frame in the garage even if you can only stare at it for a while until your daughter's home is sorted out. My Light Six is on hold while I wait for the trimmer to take the seats (already put back by another 3 months) so i have been working on the MG TD chassis. I rather like cleaning up old metal and if you were nearer I would be delighted to come over with my angle grinder to help!
- jeans_old_man
- Posts: 411
- Joined: Wed Apr 12, 2017 10:47 pm
- First Name: Brian
- Location: Cheshire
Re: new body in the works
That's sad news about your Six, Colin - I told you to tackle it yourself
I was looking forward to seeing how the leather from Martrim turned out before embarking on mine. Do you think it needs doing?
I was looking forward to seeing how the leather from Martrim turned out before embarking on mine. Do you think it needs doing?
- mikeyr
- Site Admin
- Posts: 1347
- Joined: Thu Nov 17, 2005 10:20 am
- First Name: Mike
- Location: S. Calif.
- Contact:
Re: new body in the works
at least there is plenty there for good patterns !
My LM that the body is being built for does not even have seat at all, but being a early car with bench seating, should be pretty easy to figure out. Some plywood, some foam and some leather and voila. Although I believe it originally had a air bladder, I may try that from a Morgan. I got all the back hardware from Hardwick a month ago.
My LM that the body is being built for does not even have seat at all, but being a early car with bench seating, should be pretty easy to figure out. Some plywood, some foam and some leather and voila. Although I believe it originally had a air bladder, I may try that from a Morgan. I got all the back hardware from Hardwick a month ago.
Mike Rambour. Site Administrator
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
- jeans_old_man
- Posts: 411
- Joined: Wed Apr 12, 2017 10:47 pm
- First Name: Brian
- Location: Cheshire
Re: new body in the works
There are a few details in the Hardwick's Spares Catalogue and I seem to remember a post on this forum. Try here: https://forum.singercars.com/viewtopic.php?p=7833#p7833
- mikeyr
- Site Admin
- Posts: 1347
- Joined: Thu Nov 17, 2005 10:20 am
- First Name: Mike
- Location: S. Calif.
- Contact:
Re: new body in the works
Thank you, I had completely forgoten that post. Based on that other post, I can start making some very rough oversized parts that will need trimming to size when the body arrives but gets me started.
Mike Rambour. Site Administrator
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
- mikeyr
- Site Admin
- Posts: 1347
- Joined: Thu Nov 17, 2005 10:20 am
- First Name: Mike
- Location: S. Calif.
- Contact:
Re: new body in the works
the body tub is done...doors are next then the sheet metal
Mike Rambour. Site Administrator
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT