Trying to find an exhaust flange gasket for my 4adt.
Anyone have a spare?
I am reluctant to make one as the reviews on sheet gasket material are not great. Thank you
4AD exhaust flange gssket
-
- Posts: 40
- Joined: Sun Jun 16, 2019 11:14 pm
- First Name: Grant
Re: 4AD exhaust flange gssket
I have found that an exhaust sealant will make up for any deficiencies in a home made gasket so if all else fails you could try that.
-
- Posts: 73
- Joined: Wed Jun 06, 2007 7:46 pm
- First Name: Steve
- Location: SW Iowa, USA
Re: 4AD exhaust flange gssket
I fabricated a gasket from high temp gasket material purchased from NAPA, then added a thin layer of high temp silicone based sealant to both sides. Still leak free 8 years later.
I should add not many miles in that time, but hey...
I also used a .4" thick stainless exhaust flange I had made, which helps some.
I should add not many miles in that time, but hey...
I also used a .4" thick stainless exhaust flange I had made, which helps some.
Steve W
Singer 4ADT
Singer 4ADT