My Le Mans has been fitted with cycle wings with home made supports. The supports seem to pass through a hole in the radiator surround and connect to a tube which obviously needs to be removable to remount and reassemble.
Can anyone advise or post a photo of the correct arrangement / fixing that would have been original. Also what should the diameter of that tube be.
Thanks in anticipation.
34 Le Mans Wing / Radiator support bar
Re: 34 Le Mans Wing / Radiator support bar
Hi, I have mine in parts now, I will post details later today. Alas I had an original bar and a Hardwick grill, guess what? The original bar was wider than the grill, back to the lath and grinder and all well now. I just need final paint before reassembly
The bar goes across the drill and is held in place by small nut and bolt. A larger bolt goes through the bracket large holes and through the large holes in the grill and then the bracket screws on to the bolts.
The bar goes across the drill and is held in place by small nut and bolt. A larger bolt goes through the bracket large holes and through the large holes in the grill and then the bracket screws on to the bolts.
Re: 34 Le Mans Wing / Radiator support bar
That makes it clear, thank you.