Hello,
My gearbox mounts in the 4AD are apparently getting kind of soft and not so effective. Is the a known supplier for these mounts?
Thanks,
D'Arcy
Gearbox mounts supplier?
-
- Posts: 73
- Joined: Wed Jun 06, 2007 7:46 pm
- First Name: Steve
- Location: SW Iowa, USA
Re: Gearbox mounts supplier?
A few years ago when I went looking, I couldn't find a supplier, so I used universal "biscuit" type motor mount pads sourced from Speedwaymotors.com
(p/n 7209314-just looked them up) and modified them to suit. You could use pretty much any moderate durometer rubber mount that fits the gearbox mounting ears.
The front motor mount was still available then from the U.K. club spares, and I fabricated the side mounted torque limiter mount as best I could from photos, since I didn't have one at all.
(p/n 7209314-just looked them up) and modified them to suit. You could use pretty much any moderate durometer rubber mount that fits the gearbox mounting ears.
The front motor mount was still available then from the U.K. club spares, and I fabricated the side mounted torque limiter mount as best I could from photos, since I didn't have one at all.
Steve W
Singer 4ADT
Singer 4ADT
Re: Gearbox mounts supplier?
That's very helpful. Thanks very much!
D'Arcy
D'Arcy