I am looking for the bracket that attaches to the rear of the boot that holds the tyre tie down strap. If anyone has one please contact me.
Thank you,
Louis Levin
Part needed for a '53 4AD
-
- Posts: 46
- Joined: Mon Aug 19, 2013 9:11 pm
- First Name: Louis
- Location: Modesto, California, USA
-
- Posts: 164
- Joined: Thu Feb 03, 2011 9:27 am
- First Name: Stephen
- Location: Victor Harbor, South Australia, Australia
Re: Part needed for a '53 4AD
Hi Louis, I think your after a Footman Loop see the following http://www.vintagecarparts.co.uk/search ... otman+loop
Regards
Stephen
Regards
Stephen
-
- Posts: 46
- Joined: Mon Aug 19, 2013 9:11 pm
- First Name: Louis
- Location: Modesto, California, USA
Re: Part needed for a '53 4AD
Thanks Stephen, I have the footman's loops. I need the bracket that is located behind the tire . I will try to upload a picture of what I am looking for. This web site won't let me up load the picture it is to big. I will try to email it to you.
-
- Posts: 164
- Joined: Thu Feb 03, 2011 9:27 am
- First Name: Stephen
- Location: Victor Harbor, South Australia, Australia
Re: Part needed for a '53 4AD
Hi Lois,.. finaly managed to get back in the shed, this is how my spare tyre is held in with a footman loop..
once agin I find it hard to upload images, so I hope this url turns out ..
Regards
Stephen
once agin I find it hard to upload images, so I hope this url turns out ..
Regards
Stephen
-
- Posts: 46
- Joined: Mon Aug 19, 2013 9:11 pm
- First Name: Louis
- Location: Modesto, California, USA
Re: Part needed for a '53 4AD
Stephen: Thanks for the picture of what you have on your car. Is there another footman's loop down further behind the tyre?
Louis
Louis
-
- Posts: 164
- Joined: Thu Feb 03, 2011 9:27 am
- First Name: Stephen
- Location: Victor Harbor, South Australia, Australia
Re: Part needed for a '53 4AD
Hi Lois .. there are 2 footman loops one on top and the other near the hub hole in the wheel, I do not know if they came out like this, but I did mine this way to hold the spare wheel securely.
find it hard to upload images, sometimes they work other times they dont.
Regards Stephen
find it hard to upload images, sometimes they work other times they dont.
Regards Stephen
Re: Part needed for a '53 4AD
Hi,
I believe Louis is referring to this bracket that is holding the spare wheel strap ends. I believe this is the original configuration. Steven's car has also the flat bar extending downwards from the sheet metal wall on top of the wall forward of the spare wheel.
Sorry, I have not yet had time to take you the measurements for fabricating this.
Regards,
Pekka
I believe Louis is referring to this bracket that is holding the spare wheel strap ends. I believe this is the original configuration. Steven's car has also the flat bar extending downwards from the sheet metal wall on top of the wall forward of the spare wheel.
Sorry, I have not yet had time to take you the measurements for fabricating this.
Regards,
Pekka
4ADT Roadster, 1954 --- http://www.guru-group.fi/kabu/singer
-
- Posts: 20
- Joined: Sat Feb 20, 2016 8:50 pm
- First Name: John
Re: Part needed for a '53 4AD
Does anyone have a spare running board for a 54 4AD.I have just bought a basket case which will clean up OK ,however I am missing parts some of which will be supplied by a donor car I have found locally. The donor cars running boards are rotten and I need the right hand side.
Hope to be up and running in a year or two
John Steggles
Hope to be up and running in a year or two
John Steggles
-
- Posts: 46
- Joined: Mon Aug 19, 2013 9:11 pm
- First Name: Louis
- Location: Modesto, California, USA
Re: Part needed for a '53 4AD
Stephen: You might try to contact Fred at fredzampa@yahoo.com he has a lot of old parts. I purchased a gas tank from him and some seat parts a year ago. Good luck.
Louis
Louis