4AD Rad Shell Inside tabs
4AD Rad Shell Inside tabs
Would anyone have a picture available of the 4AD INSIDE of the rad surround (shell). There look to be 3 tabs spot welded to the shell which must be used to attach the grille slats. These tabs are broken off on mine and I want to replace them before I get the chrome done. Any help appreciated.Grant
Re: 4AD Rad Shell Inside tabs
Hi Grant,
Here's a picture of the inside radiator shell, hope this helps. Take care...
Patrick
Here's a picture of the inside radiator shell, hope this helps. Take care...
Patrick
- Attachments
-
- Picture 393A.jpg (13.23 KiB) Viewed 1080 times
- Paul Bouchard
- Posts: 414
- Joined: Thu Nov 17, 2005 9:35 pm
- First Name: Paul
- Location: Deux-Montagnes, Quebec, Canada
- Contact:
Re: 4AD Rad Shell Inside tabs
Grant,
Here are a couple of photos of the inside of the chrome shell. Essentially the 2 tabs on the side are bent metal (at 90 degrees) with a hole to attach the top cross bracket for the grille. Another tab is at the top just under where the Singer badge is attached. It folds down over the center spline of the grille.
Paul
Here are a couple of photos of the inside of the chrome shell. Essentially the 2 tabs on the side are bent metal (at 90 degrees) with a hole to attach the top cross bracket for the grille. Another tab is at the top just under where the Singer badge is attached. It folds down over the center spline of the grille.
Paul
Paul Bouchard
President, NASOC
Nine Roadster Registrar
1948 A Series Roadster
1947 Super Ten Saloon
1935 Le Mans Super Speed Model
Just enjoying the ride.
President, NASOC
Nine Roadster Registrar
1948 A Series Roadster
1947 Super Ten Saloon
1935 Le Mans Super Speed Model
Just enjoying the ride.