My clutch arm and pedal make quite a noise when the clutch pedal is fully released.
Put slight pressure on the pedal and the chatter stops.
The throwout bearing is new and the arm appeared good. Thoughts?
Thank you
4ADT clutch arm/pedal chatter
-
- Posts: 40
- Joined: Sun Jun 16, 2019 11:14 pm
- First Name: Grant
- mikeyr
- Site Admin
- Posts: 1347
- Joined: Thu Nov 17, 2005 10:20 am
- First Name: Mike
- Location: S. Calif.
- Contact:
Re: 4ADT clutch arm/pedal chatter
Can you identify where the noise is coming from ? meaning inside the bell housing or at the arm itself ? it is possible the arm has too much slop at the pivot point and causing a rattle. The fact that when you put the clutch in the noise stops, implies its not the throwout bearing.
Mike Rambour. Site Administrator
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
-
- Posts: 40
- Joined: Sun Jun 16, 2019 11:14 pm
- First Name: Grant
Re: 4ADT clutch arm/pedal chatter
I am wondering if my clutch return spring is too strong and is pulling the arm back off of the pivot?