Looking for the 8 rockers and a cam shaft for a 1951 Singer 4AD engine, 1497cc
The condition is a key factor as I already have these items it's just they're worn out. Thanks,
Cam & Rockers 51 Singer 4AD 1497cc
Cam & Rockers 51 Singer 4AD 1497cc
Last edited by wmcvey on Sat Jan 15, 2022 3:29 pm, edited 2 times in total.
52 Singer 4AD
Re: 1951 Singer 4AD engine, 1497cc
Sorry to highjack your thread, but I am also looking for some rocker arms to replace the worn ones on my 53 4AD. I'm wondering if there are other British cars that may have used a common rocker that will be more readily available?
- jeans_old_man
- Posts: 412
- Joined: Wed Apr 12, 2017 10:47 pm
- First Name: Brian
- Location: Cheshire
Re: 1951 Singer 4AD engine, 1497cc
Can they not be repaired? I had the rockers for my 972 engine repaired by Newman Cams, Farnborough Way, Farnborough, Kent. BR6 7DH. UK tel: +44 (0)1689 857 109 email: info@newman-cams.com
They made me a new camshaft whilst they were at it and are currently manufacturing a new cam for my 1.5L sports. Their work is excellent but they are not the speediest company in the world.
They made me a new camshaft whilst they were at it and are currently manufacturing a new cam for my 1.5L sports. Their work is excellent but they are not the speediest company in the world.
Re: 1951 Singer 4AD engine, 1497cc
Thanks for the info, Brian. Perhaps the cams can be repaired. What was the process used to repair your cams? My cylinder head is at an engine machine shop getting reworked and they are the ones that identified the issue. The machinist did say that I might be able to weld up some material on the worn surface and then machine it back to spec. Is that what you had done?
This particular shop does not do welding, but they might be able to recommend someone that does. I guess I was hoping to find some NOS or gently used replacements online as a path of least resistance. I am discovering that with Singers, nothing is that easy.
This particular shop does not do welding, but they might be able to recommend someone that does. I guess I was hoping to find some NOS or gently used replacements online as a path of least resistance. I am discovering that with Singers, nothing is that easy.
Re: 1951 Singer 4AD engine, 1497cc
My circumstance is almost identical to yours. The block and head are at a machine shop getting rebuilt, but the cams are worn too low and the rocker ends are too flat. I going to reach out to the folks mentioned above, but being I'm in the states having things shipped overseas would be my last option. Also looking for a gently used head for the 1497 CC motor, or at least the camshaft and a set of rockers. I actually have a 52 Singer Roadster that I'm trying to restore, but come to find out there's actually a 51 engine in it. So at some point that got switched out.
52 Singer 4AD
- mikeyr
- Site Admin
- Posts: 1347
- Joined: Thu Nov 17, 2005 10:20 am
- First Name: Mike
- Location: S. Calif.
- Contact:
Re: Cam & Rockers 51 Singer 4AD 1497cc
the 4AD engines were all the same, minor improvements in components on the later years but the major components are all the same. A 51 head will fit and work on a 55 and vice-versa. No difference in camshafts either.
Mike Rambour. Site Administrator
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
1953 Singer 4ADT (sold), 1934 Singer 9 Le Mans, 1934 Singer 1 1/2 4-Seater Sports (sold), 2009 BMW K1300GT
Re: Cam & Rockers 51 Singer 4AD 1497cc
Now I'm just needing a set (eight) of good rockers. My shop found someone to build up / machine the lobs on the cam.
Does anyone have a set of these rockers their wanting to sell ??
52 Singer 4AD