4AD Brakes
- Mark Thompson
- Posts: 196
- Joined: Thu Nov 17, 2005 8:51 pm
- First Name: Mark
- Location: Nashville, TN
4AD Brakes
Can anyone tell me what type fittings are used on the steel brake lines on the 4AD? What type of flare on the tubing? What is the thread on the fittings? Does anyone have a source for 5/32" compression ferrules for the manifold drain lines?
Brake lines
Mark,
As I recall I just used regular 3/16" steel tubing from auto parts store and they were regular US thread. Double inverted flare(standard US). I do supply the brake hoses for the front brakes. The master cylinder supply tube from the resivour is 1/4" and the line nuts for this need to be reused.
BRG
As I recall I just used regular 3/16" steel tubing from auto parts store and they were regular US thread. Double inverted flare(standard US). I do supply the brake hoses for the front brakes. The master cylinder supply tube from the resivour is 1/4" and the line nuts for this need to be reused.
BRG
NASOC Treasurer
NASOC 4AD Registrar
NASOC Parts Guy
Owner of a 1952 4AD, 1959 Singer Gazelle Estate, & 1959 Gazelle Convertible
NASOC 4AD Registrar
NASOC Parts Guy
Owner of a 1952 4AD, 1959 Singer Gazelle Estate, & 1959 Gazelle Convertible
-
- Posts: 4
- Joined: Wed Jan 11, 2006 7:30 pm
- Location: Centennial, Colorado
Mark,
I have some steel brake lines for an SM1500.
Reservoir to Master cyl, master cyl to tee, tee to each side of frame
Send me an email, maybe I can help.
George Cohan cgi1@qwest.net
I have some steel brake lines for an SM1500.
Reservoir to Master cyl, master cyl to tee, tee to each side of frame
Send me an email, maybe I can help.
George Cohan cgi1@qwest.net