Gearbox mounts supplier?

The 4A, 4AB, 4AC, 4AD cars, including the SM 1500 Roadster and SMX
DGreen
Posts: 55
Joined: Sun May 08, 2016 3:05 am
First Name: D'Arcy
number: 3

Gearbox mounts supplier?

Postby DGreen » Wed Aug 31, 2016 4:25 am

Hello,

My gearbox mounts in the 4AD are apparently getting kind of soft and not so effective. Is the a known supplier for these mounts?

Thanks,

D'Arcy

bitsobrits
Posts: 46
Joined: Wed Jun 06, 2007 7:46 pm
number: 0
Location: SW Iowa

Re: Gearbox mounts supplier?

Postby bitsobrits » Thu Sep 01, 2016 1:30 am

A few years ago when I went looking, I couldn't find a supplier, so I used universal "biscuit" type motor mount pads sourced from Speedwaymotors.com
(p/n 7209314-just looked them up) and modified them to suit. You could use pretty much any moderate durometer rubber mount that fits the gearbox mounting ears.

The front motor mount was still available then from the U.K. club spares, and I fabricated the side mounted torque limiter mount as best I could from photos, since I didn't have one at all.
Steve W
Singer 4ADT

DGreen
Posts: 55
Joined: Sun May 08, 2016 3:05 am
First Name: D'Arcy
number: 3

Re: Gearbox mounts supplier?

Postby DGreen » Fri Sep 02, 2016 4:52 am

That's very helpful. Thanks very much!

D'Arcy


Return to “4's and up”

Who is online

Users browsing this forum: No registered users and 1 guest