Gearbox mounts supplier?

The 4A, 4AB, 4AC, 4AD cars, including the SM 1500 Roadster and SMX
Post Reply
DGreen
Posts: 60
Joined: Sun May 08, 2016 3:05 am
First Name: D'Arcy

Gearbox mounts supplier?

Post by DGreen »

Hello,

My gearbox mounts in the 4AD are apparently getting kind of soft and not so effective. Is the a known supplier for these mounts?

Thanks,

D'Arcy
bitsobrits
Posts: 73
Joined: Wed Jun 06, 2007 7:46 pm
First Name: Steve
Location: SW Iowa, USA

Re: Gearbox mounts supplier?

Post by bitsobrits »

A few years ago when I went looking, I couldn't find a supplier, so I used universal "biscuit" type motor mount pads sourced from Speedwaymotors.com
(p/n 7209314-just looked them up) and modified them to suit. You could use pretty much any moderate durometer rubber mount that fits the gearbox mounting ears.

The front motor mount was still available then from the U.K. club spares, and I fabricated the side mounted torque limiter mount as best I could from photos, since I didn't have one at all.
Steve W
Singer 4ADT
DGreen
Posts: 60
Joined: Sun May 08, 2016 3:05 am
First Name: D'Arcy

Re: Gearbox mounts supplier?

Post by DGreen »

That's very helpful. Thanks very much!

D'Arcy
Post Reply