Does anyone know of someone in the USA that makes a replacement gas tank for a Singer 4AD? I had mine sealed a couple of years ago and it is now leaking very slowly so I will need to replace the unit. If there is a good used one, that might work. Would prefer a new one.
Thanks in advance.
Louis
New gas (petrol) tank
-
- Posts: 46
- Joined: Mon Aug 19, 2013 9:11 pm
- First Name: Louis
- Location: Modesto, California, USA
-
- Posts: 73
- Joined: Wed Jun 06, 2007 7:46 pm
- First Name: Steve
- Location: SW Iowa, USA
Re: New gas (petrol) tank
Louis, I had a new one made in aluminum by a company (in the US) I found online who specializes in fuel tanks. Cant' for the life of me remember the name but I'll look to see if I have a receipt. I simply measured up the tank after removing it and they an excellent job of reproducing the original. Once it was powder coated black it looks very much correct for the car.
I have the dimensional file I used in a Sketchup file format if you have that software, but still would recommend you measure up your original to be sure.
I have the dimensional file I used in a Sketchup file format if you have that software, but still would recommend you measure up your original to be sure.
Steve W
Singer 4ADT
Singer 4ADT
-
- Posts: 46
- Joined: Mon Aug 19, 2013 9:11 pm
- First Name: Louis
- Location: Modesto, California, USA
Re: New gas (petrol) tank
Steve: I would very much appreciate having the name. When you have time to look for it, please send it to me. I am going to see if the tank I have can be repaired. It appears to leaking at the top side seam only started to leak when I filled the tank.
Louis
Louis
Re: New gas (petrol) tank
Having one made . will be done by end of April will let know cost and review when i recieve