Page 1 of 1

Flywheel cover

Posted: Thu Mar 17, 2016 7:56 pm
by WTXCARNUT
Did the 4AD have a flywheel cover between engine and trans? appears mine is missing appears to be bolt holes no cover....?? Does anyone have a spare one ?

Re: Flywheel cover

Posted: Fri Mar 18, 2016 3:57 pm
by mikeyr
you mean a bell housing ? yes they did, sorry i don't have one.

Re: Flywheel cover

Posted: Mon Nov 14, 2016 4:51 pm
by 2001f4s
My 4A does have a flywheel cover on the bottom in addition to the bellhousing. Sort of fills out the bottom of the bellhousing and seems to make accessing the clutch easier from underneath,
Can send photo and dimensions if you need.

Re: Flywheel cover

Posted: Tue Nov 22, 2016 1:37 am
by WTXCARNUT
2001f4s wrote:My 4A does have a flywheel cover on the bottom in addition to the bellhousing. Sort of fills out the bottom of the bellhousing and seems to make accessing the clutch easier from underneath,
Can send photo and dimensions if you need.
That would be great, thanks,Ron

Re: Flywheel cover

Posted: Wed Nov 23, 2016 11:11 pm
by 2001f4s
Here are some photos with rough dimensions. I am in Chicago Area, so getting cold in the old garage, and I clearly have not had time to clean up this part. Let me know if there are dimensions or angles for the photos that you want. I hope to have it cleaned up in the coming weeks and I can provide more detail.

Scott

Image

Image

Image

Image

Image

Re: Flywheel cover

Posted: Sat Jan 21, 2017 1:17 am
by WTXCARNUT
Thanks....taken me a while to get back on here....at least I kinda know what it looked like....I'm afraid I'm going to have to rebuild engine... runs pretty good still could use a better tune up but appears is burning oil....needs oil change, pretty dirty, no telling when it has been changed....probable original engine without rebuild......don't know that changing oil will do me any good.... afraid going to have to pull out and rebuild and hope it can be rebuilt....scary since engines don't seem to be anywhere around.....