Does anyone have a picture or two that focuses on the wood joinery in the cowl area, particularily the inside and outside view of the intersection at the door pillar and forward? Mine looks cobbled and incorrect. Brook
bmlindbert@aol,com
PS its a 1952 4AD SM1500
Cowl area wood joinery
Re: Cowl area wood joinery
Hi Brook,
On my website I have some pictures from my recent restoration project of a 1954 4AD, also some from this area. You could check if there is some that are useful to you here - http://www.guru-group.fi/~kabu/index.ph ... &Itemid=61
Regards,
Pekka
On my website I have some pictures from my recent restoration project of a 1954 4AD, also some from this area. You could check if there is some that are useful to you here - http://www.guru-group.fi/~kabu/index.ph ... &Itemid=61
Regards,
Pekka
4ADT Roadster, 1954 --- http://www.guru-group.fi/kabu/singer
-
- Posts: 24
- Joined: Fri Feb 21, 2014 7:56 pm
- First Name: Brook
Re: Cowl area wood joinery
Pekka,
Thanks for the wonderful collection of photos, from which I was able to identify the Cowl area joinery.
As I looked over the better part of the photos from the whole project, I was wondering where you got the seal strip that closes out the bottom of the windscreen? Mine is missing.
Thanks
Brook
Thanks for the wonderful collection of photos, from which I was able to identify the Cowl area joinery.
As I looked over the better part of the photos from the whole project, I was wondering where you got the seal strip that closes out the bottom of the windscreen? Mine is missing.
Thanks
Brook
Re: Cowl area wood joinery
Hi Brook,
I got the windshield bottom rubber from Bill Haverly in the UK. Bill is the Singer Roadster spares specialist for ASCO (Association of Singer Car Owners). You should be able to contact him via the following page:
http://www.asco.org.uk/page187.html
Regards,
Pekka
I got the windshield bottom rubber from Bill Haverly in the UK. Bill is the Singer Roadster spares specialist for ASCO (Association of Singer Car Owners). You should be able to contact him via the following page:
http://www.asco.org.uk/page187.html
Regards,
Pekka
4ADT Roadster, 1954 --- http://www.guru-group.fi/kabu/singer
-
- Posts: 24
- Joined: Fri Feb 21, 2014 7:56 pm
- First Name: Brook
Re: Cowl area wood joinery
Pekka
Do you still have any Manufacturers plates available. Mine was never there from the days of my procurement in 1978. Also, are you still making Choke and Starter Cables?
Latest Cost??
Shipping to USA, Leland NC 28451
Brook Lindbert
bmlindbert@aol.com
910-443-9031
Do you still have any Manufacturers plates available. Mine was never there from the days of my procurement in 1978. Also, are you still making Choke and Starter Cables?
Latest Cost??
Shipping to USA, Leland NC 28451
Brook Lindbert
bmlindbert@aol.com
910-443-9031
Re: Cowl area wood joinery
Hi Brook,
I do still have a few Singer manufacturer plates available. I also have Start and Choke knobs but no fully assembled cables at the moment. I can acquire necessary parts and assemble cables but it will take a while.
I will figure out the costs and send you an email.
Regards,
Pekka
I do still have a few Singer manufacturer plates available. I also have Start and Choke knobs but no fully assembled cables at the moment. I can acquire necessary parts and assemble cables but it will take a while.
I will figure out the costs and send you an email.
Regards,
Pekka
4ADT Roadster, 1954 --- http://www.guru-group.fi/kabu/singer