Sing 10 Starter Motor

For now, I lumped all the pre-war cars together, I would LOVE for there to be enough demand to split it into groups (hint...hint, post here about your pre-war Singer)
Posts: 164
Joined: Thu Feb 03, 2011 9:27 am
First Name: Stephen
number: 3
Location: Victor Harbor, South Australia, Australia

Sing 10 Starter Motor

Postby Stephen » Sun Mar 08, 2015 9:25 am

Hi Everyone .. I have assembled a 10 hp Singer motor, only to find the starter motor will not mesh when activated.
When I say it does not mesh, it actually does for a second or two and then just grinds away on the side of the ring gear ..
I have had to reconstruct this motor from several Singer 9 and 10 parts, so things may have gotten a little mixed up ..
The flywheel ring gear that is on the 10 motor has 89 teeth, the starter has 9 teeth on the pinion?.
This does not seem to work, do I need a different starter with more or less teeth on the pinion?
I have another starter, from another engine, not even sure it's Singer with 11 teeth on the pinion, but before I connect it up, can someone advise me if it will work ..
Any help would be appreciated..

Return to “Pre-War”

Who is online

Users browsing this forum: No registered users and 1 guest