Search found 101 matches
- Fri Feb 23, 2007 2:10 am
- Forum: 4's and up
- Topic: 4AD Oil pan Baffles??
- Replies: 3
- Views: 1374
Oil pan baffles
I have never torn into a Singer engine, but I have been inside many others, foreign and domestic. The purpose of the baffles and windage trays is to keep the oil off of the crankshaft. Windage trays are used in racing applications where high RPM's create unstability in the oil pan and cause the oil ...
- Sun Feb 11, 2007 3:30 pm
- Forum: 4's and up
- Topic: My Singer 4AD restoration project website
- Replies: 6
- Views: 2911
Great Pictures
Thank you so much for posting the pictures of your car. I am in the middle of restoring my modified 1952 4AD. This is the first time I have seen another Singer up close. I never realized how modified the body is on my car. 95% of the wood in my car has been replaced with steel.
Dave
Dave
- Thu Jan 04, 2007 2:34 am
- Forum: 4's and up
- Topic: Fender Welting
- Replies: 6
- Views: 1815
Fender Welting
Does anyone know the correct size of the fender welting on an 4AD?
1/16th inch 1/8th inch 1/4 inch
The welting goes between the fenders and the body.
How about the thickness of the wood shims between the body and the frame?
Thanks, Dave
1/16th inch 1/8th inch 1/4 inch
The welting goes between the fenders and the body.
How about the thickness of the wood shims between the body and the frame?
Thanks, Dave
- Thu Nov 16, 2006 1:49 am
- Forum: 4's and up
- Topic: 4 AD Seats
- Replies: 0
- Views: 5287
4 AD Seats
Does anyone have a pair of 4AD seats they want to sell?
If not has anyone used seats from another car that fit well? Possibly MG, Triumph, Alpha Romeo????
Dave
If not has anyone used seats from another car that fit well? Possibly MG, Triumph, Alpha Romeo????
Dave
- Wed Oct 04, 2006 2:42 am
- Forum: 4's and up
- Topic: Set engine position
- Replies: 4
- Views: 1620
Setting Cam Timing
This method is also referred to as the "Rabbit Ears". As long as number 1 piston is at TDC and the ears point up the engine will be in time. Also the distributor rotor will be pointing to the number 1 cylinder on the distributor cap.
- Thu Sep 14, 2006 3:21 am
- Forum: 4's and up
- Topic: NEED MEASUREMENTS FOR 4AD
- Replies: 1
- Views: 1057
NEED MEASUREMENTS FOR 4AD
My car has been heavily modified with steel replacing the wood under the dash, trunk, and floor area. The person who did it was not too proficient. I would like to put everything back in its' proper location. Can someone provide the measurements for the following? The center of the steering wheel to...
- Wed Sep 13, 2006 4:13 am
- Forum: 4's and up
- Topic: 1952 4AD Gas Tank
- Replies: 1
- Views: 1045
1952 4AD Gas Tank
Does anyone need a gas tank? The bottom has holes in it, but could be repaired. There is no sending unit. You pay the shipping plus $5.00 and I will send it to you.
Dave
Dave
- Wed Aug 23, 2006 3:40 am
- Forum: 4's and up
- Topic: Front suspension
- Replies: 2
- Views: 1530
Front suspension
I have installed the fuel injected V-6 along with the transmission in my 1952 4AD. I would like to change the front suspension to gain disc brakes and rack and pinion steering. I looked into using a Mustang II, but it is too big. I thought I remember reading about someone using MG components. Does a...
- Sat Aug 12, 2006 5:04 pm
- Forum: 4's and up
- Topic: Paint Colors
- Replies: 2
- Views: 1541
Paint Colors
Does anyone have a listing for the paint colors for a 1952 4 AD. My car is far from stock, but I am looking for ideas.
Thanks, Dave
Thanks, Dave
- Wed Jul 12, 2006 7:31 pm
- Forum: 4's and up
- Topic: Replacing the Door Skins on a 4 AD
- Replies: 0
- Views: 5561
Replacing the Door Skins on a 4 AD
I just finished reskinning the doors on my 4 AD. The previous owner decided that fiberglass would be easier to work with than the aluiminum. I started by stripping all of the fiberglass off the doors. I then made a template of each door. Very important for reassembly! I removed all of the metal edgi...
- Wed Jun 07, 2006 4:36 am
- Forum: 4's and up
- Topic: My 4AD finally arrived
- Replies: 4
- Views: 1875
My 4AD finally arrived
My 4AD finally arrived from Texas last week. Some of you may have seen this car on eBAY. It is a 1952 that has been heavily modified. Exactly what I was looking for. The drivetrain is a 6 cylinder Ford with an automatic transmission and an 8 inch rear. Basically all Mustang. The wood under the dash ...