Search found 105 matches
- Wed Apr 08, 2015 3:27 pm
- Forum: 4's and up
- Topic: Red and Chrome Singer Badge
- Replies: 6
- Views: 2042
Re: Red and Chrome Singer Badge
Good day to all, I heard back from Sandra P. and ASCO currently has no reproduction badges and are in the process of finding a new supplier. Don’t know when or if they may have them back in stock. If there are any other ideas where I might obtain one, please let me know. At this point, it’s looking ...
- Mon Apr 06, 2015 3:12 pm
- Forum: 4's and up
- Topic: Red and Chrome Singer Badge
- Replies: 6
- Views: 2042
Re: Red and Chrome Singer Badge
Hi Pekka, Thanks for the info! I am an ASCO member and have obtained many of my restoration parts from Bill Haverly! I’m not sure what I would have done without him and the club! At any rate, I know he has had some challenges here lately and that others were helping with the parts. I’ll send the mes...
- Fri Apr 03, 2015 12:10 am
- Forum: 4's and up
- Topic: Red and Chrome Singer Badge
- Replies: 6
- Views: 2042
Red and Chrome Singer Badge
Hey Guys, I was wondering if anyone out there has a new Singer radiator shell badge. I have the original which is down to the brass, the chrome and red is long gone. I'm sure I could restore it, but I thought I remember seeing that someone had a batch reproduced. Thanks again for all the help! :D Fred
- Fri Feb 13, 2015 4:24 pm
- Forum: 4's and up
- Topic: Running board rubber ends
- Replies: 24
- Views: 14186
Re: Running board rubber ends
The project is on the back burner but needs to be put up front! Chrome plating nearly all the 4AD parts on this car is on the near horizon! I still have no good economical fix to this problem, but I don't easily give up!
- Wed Oct 22, 2014 12:34 pm
- Forum: 4's and up
- Topic: Castrol LMA
- Replies: 2
- Views: 1360
Re: Castrol LMA
Thanks Steve, looks like the way to go! It's not readily available at local auto parts stores though, so I ordered a small amount via the web. Thanks for the help!!!!
- Mon Oct 20, 2014 3:25 pm
- Forum: 4's and up
- Topic: Castrol LMA
- Replies: 2
- Views: 1360
Castrol LMA
Good day to all, After reaching a major milestone of completing the woodwork repairs and getting the 4AD body to the paint shop, I redirected my efforts back to the frame and restoration of all that bolts to it. Picking up where I left off almost a year ago to finish the brake cylinder rebuilds, I n...
- Wed Aug 20, 2014 5:03 pm
- Forum: 4's and up
- Topic: 1952 4AD Door Striker Plates
- Replies: 5
- Views: 2120
Re: 1952 4AD Door Striker Plates
Great idea, keep us posted! What material did you use? I've seen some mention stainless steel which means just polish and go, no chrome plating needed.
Thanks again
Fred
Thanks again
Fred
- Tue Aug 19, 2014 3:23 pm
- Forum: 4's and up
- Topic: 1952 4AD Door Striker Plates
- Replies: 5
- Views: 2120
Re: 1952 4AD Door Striker Plates
Hey Stephen,
Thanks for the info; I may have to go that direction if nothing else pops up! I do have one or two other sources that I'm looking into, we'll see!
Thanks again!!!
Fred
Thanks for the info; I may have to go that direction if nothing else pops up! I do have one or two other sources that I'm looking into, we'll see!
Thanks again!!!
Fred
- Tue Aug 05, 2014 12:13 am
- Forum: 4's and up
- Topic: 1952 4AD Door Striker Plates
- Replies: 5
- Views: 2120
1952 4AD Door Striker Plates
Hello Guys, I am in need of two door striker plates for my 52 4AD. The two I have appear to have been filed or worn such that the latch would fit the hole as the doors have sagged over the years. After a limited search on this forum, looks like most have made their own. Does any other car out there ...
- Mon Aug 04, 2014 10:42 pm
- Forum: 4's and up
- Topic: 4AD Boot Straps wanted
- Replies: 19
- Views: 6952
Re: 4AD Boot Straps wanted
Pekka,
I have just realized that I never responded and thanked you for the boot lid inner panel oval template! Thanks again, it will help out greatly!!!!! Thanks Louis for the heads-up!
Blessings,
Fred
I have just realized that I never responded and thanked you for the boot lid inner panel oval template! Thanks again, it will help out greatly!!!!! Thanks Louis for the heads-up!
Blessings,
Fred
- Tue Nov 19, 2013 4:15 pm
- Forum: 4's and up
- Topic: 4AD Boot Straps wanted
- Replies: 19
- Views: 6952
Re: 4AD Boot Straps wanted
Hey Guys, While we're on the subject of this general area, could someone provide the dimensions or a pattern of the oval hole in the boot inner panel, and exactly where it is located? My car came with this panel replaced and the hole was deleted. I'll need to make another panel but don't know where ...
- Mon Nov 18, 2013 6:04 pm
- Forum: 4's and up
- Topic: Singer 4AD body manufacture questions
- Replies: 5
- Views: 2745
Re: Singer 4AD body manufacture questions
Hey Allen,
As I remember, Phillip had a aftermarket new old stock front valance that he might be willing to part with.
Good luck,
Fred
As I remember, Phillip had a aftermarket new old stock front valance that he might be willing to part with.
Good luck,
Fred
- Thu Aug 22, 2013 5:13 pm
- Forum: 4's and up
- Topic: Running board rubber ends
- Replies: 24
- Views: 14186
Re: Running board rubber ends
Hey Stephen, I have received the chrome tip samples you sent for the running board rubber strips. Thank you so very much, I appreciate your time and effort!!! :P I’m looking into options to replicate, keeping the OEM look. So far I haven’t found the ideal option. I’ll keep you all posted in case the...
- Wed Aug 07, 2013 8:59 pm
- Forum: 4's and up
- Topic: Running board rubber ends
- Replies: 24
- Views: 14186
Re: Running board rubber ends
Hi Fred .. I came across a few old ones the other day .. PM me your address and I will post them to you .. Stephen Hi Stephen, Sent a PM. If you didn't get it, just let me know! I have the feeling some of my previous PMs never made it to the recipient, probably an error on my part. Thanks a bunch f...
- Wed Jul 31, 2013 12:44 pm
- Forum: 4's and up
- Topic: Running board rubber ends
- Replies: 24
- Views: 14186
Re: Running board rubber ends
Hello all,
I am still in need of one of these chrome ends to use as a pattern. If anyone out there has a sample they can part with, or one I can borrow, please let me know.
Thanks again,
Fred
I am still in need of one of these chrome ends to use as a pattern. If anyone out there has a sample they can part with, or one I can borrow, please let me know.
Thanks again,
Fred