Web Forum for Singer Cars

My Shock Link fix.
4 Heim joints. Thanks for the suggestions!

Problem solved

I know this has been covered before on this forum,I was hoping someone has had them reproduced or found a good replacement?
I need 3 Thank you

I am wondering if my clutch return spring is too strong and is pulling the arm back off of the pivot?

My clutch arm and pedal make quite a noise when the clutch pedal is fully released.
Put slight pressure on the pedal and the chatter stops.
The throwout bearing is new and the arm appeared good. Thoughts?
Thank you

Hello all. Does someone have an idea of which modern car links that will fit with some modification? Thank you

After some searching and luck...i have determined that the sender unit from a 1956 Mortis Minor is a direct bolt in with correct 0 to 90 ohms range.
my Morris friend says that the sender is the same for 1948 thru 63 Morris Minors.
Grant

after finally finding a petrol gauge i now find my sending unit burnt out. so anyone know of one or what might work?

Hello all.
I want to replace the solid 7mm wires and the missing acorn nut discs on my 4ad. Any one have a supplier? Thank you

Pic

Its for a 4AD and heres the pic. Thank you

I would be happy to purchase a complete gauge cluster if you have a spare. Thanks

Thats what i did and it works perfectly. Thank you

Hello all. I am finally getting the carpet installed in my 4ad and have come across a problem. I have 3 and only 3 of the aum. strips. All are different length and all are drilled differently. So i am guessing i am missing some? Have a look and see if the 3 strips go as laid out or ??
Thank you

I have detrmined that my dash petrol gauge is done. So looking for a replacemet. Thank you