Search found 105 matches
- Thu Feb 15, 2018 4:48 pm
- Forum: 4's and up
- Topic: Beginner
- Replies: 4
- Views: 1646
Re: Beginner
Here are a few things to keep in mind, depending on condition and how deep you want to take restoration: 1. The body is aluminum, which may require some welding. 2. The body frame is mostly wood, so some woodworking my be required. 3. Some parts are hard to get and must be procured from various part...
- Sat Jan 06, 2018 12:29 am
- Forum: 4's and up
- Topic: 4AD Hubcaps
- Replies: 1
- Views: 1412
4AD Hubcaps
I was wondering if anyone can identify these hubcaps? They came on my 52 4AD but I can't say I've ever seen any other Singer with these installed. Are they of any value or should I toss them?
Thanks!
Thanks!
- Tue Jan 02, 2018 3:18 pm
- Forum: 4's and up
- Topic: rebuilding two 4A's
- Replies: 10
- Views: 4539
Re: rebuilding two 4A's
When restoring my 1952 4AD, all wood fasteners were steel. I found no brass or any other type material. Unfortunately, most local hardware stores seem to not carry slotted wood screws these days. As with all the proper Singer hardware, your patience will be tested as you wait for that special order ...
- Sat Dec 09, 2017 10:31 pm
- Forum: 4's and up
- Topic: Tools under the Bonnet
- Replies: 4
- Views: 2536
Re: Tools under the Bonnet
Hi Steve, Here are two photos of my 52 4AD tools under the bonnet including the OEM clips that hold them to the deck. For some of the clips, I added spacers to lift the tools such that the tools wouldn't contact and damage the deck which they are mounted to. The pump is an OEM Singer original and I ...
- Wed May 24, 2017 12:53 pm
- Forum: 4's and up
- Topic: Under frame window seal
- Replies: 5
- Views: 2960
Re: Under frame window seal
I got mine from Bill Haverly of ASCO in England several years ago. Bill has passed on and I'm not sure who has taken over the club parts stock, but you can email Barry Paine at: barrydpaine@live.co.uk Barry can contact the right person to see if they might still have some in stock. Good Luck Fred
- Thu May 11, 2017 10:03 pm
- Forum: 4's and up
- Topic: New Owner Here
- Replies: 13
- Views: 8055
- Tue May 09, 2017 5:07 pm
- Forum: 4's and up
- Topic: 1952 Singer 4AD after 5 1/2 years!
- Replies: 9
- Views: 5522
Re: 1952 Singer 4AD after 5 1/2 years!
Thanks for the kind remarks Phillip! Once again, I really do appreciate all the help you and others have given me! The Singer is not an easy total restoration project, but the club has made it fun and rewarding! I attended my first car show last week and what a blast!!! :P In the eyes of the public,...
- Tue May 09, 2017 3:20 pm
- Forum: 4's and up
- Topic: New Owner Here
- Replies: 13
- Views: 8055
Re: New Owner Here
Thanks Phillip, I was in the process of posting this picture but you beat me to it. Yes it is the same muffler as shown above, I acquired mine from Summit Racing. The OEM mounting calls for one single large support clamp in the center of the muffler which attaches to the frame rail. As I can tell, t...
- Mon May 08, 2017 3:09 pm
- Forum: 4's and up
- Topic: 1952 Singer 4AD after 5 1/2 years!
- Replies: 9
- Views: 5522
Re: 1952 Singer 4AD after 5 1/2 years!
Thanks Mark! Your patience with me due to all the questions I've asked does not go unappreciated! Thanks again!!!
I'm still in need of an OEM grease gun mounting clip for the tool deck. If anyone might have one they would like to part with, it would be greatly appreciated!
Thanks again, Fred
I'm still in need of an OEM grease gun mounting clip for the tool deck. If anyone might have one they would like to part with, it would be greatly appreciated!
Thanks again, Fred
- Sun Apr 23, 2017 2:45 am
- Forum: 4's and up
- Topic: 1952 Singer 4AD after 5 1/2 years!
- Replies: 9
- Views: 5522
Re: 1952 Singer 4AD after 5 1/2 years!
Thanks Peter! You're right, I'm looking forward to a few car shows this year. Since Singer is one of the featured Marques, I'd love to be able to attend Stowe this year. Unfortunately, I have no idea how I could get the car there from Georgia without spending a fortune. An enclosed trailer and somet...
- Sat Apr 22, 2017 2:06 pm
- Forum: 4's and up
- Topic: 1952 Singer 4AD after 5 1/2 years!
- Replies: 9
- Views: 5522
1952 Singer 4AD after 5 1/2 years!
Here is the first photo of the near completed car after 5 1/2 years of restoration. There are still several tiny projects that need completed, but it's nice to finally have something to drive. This photo was taken Easter Sunday, prior to a family trip to Dairy Queen. What a wonderful day to enjoy a ...
- Sun Apr 09, 2017 8:34 pm
- Forum: 4's and up
- Topic: Singer 4AD Tools
- Replies: 3
- Views: 2379
Re: Singer 4AD Tools
Thanks for looking D'Arcy, I appreciate the effort! I've come to the conclusion that Singer parts are out there, it's simply a matter of patience before whatever part you need shows up! Anybody else out there might have one?
- Mon Apr 03, 2017 3:45 pm
- Forum: 4's and up
- Topic: Singer 4AD Tools
- Replies: 3
- Views: 2379
Singer 4AD Tools
As I close in on the final details, I was wondering if anyone might have a spare clip that the grease gun mounts to on the tool shelf. I have all the other tools and associated clips, and it would be nice to have all OEM. I assume it looks like the one in the picture below. The good news is that t...
- Tue Mar 14, 2017 10:26 pm
- Forum: 4's and up
- Topic: Side mirrors
- Replies: 9
- Views: 5759
Re: Side mirrors
Unfortunately they are not my cars. They were inventory that was being liquidated at the classic car dealer/restoration shop in New Jersey that was closing it's doors. They definitely had some cool stuff on hand that was up for grabs! I bought the Singer on EBay and flew up to NJ to take a look and ...
- Mon Mar 13, 2017 12:54 pm
- Forum: 4's and up
- Topic: Side mirrors
- Replies: 9
- Views: 5759
Re: Side mirrors
Thanks for the info D'Arcy! I've actually purchased some mirrors, but will have to fabricate a bracket to mount to the windscreen. After receiving them and taking a close look, defects on the mirror surface has forced me to return them------back to the UK. :roll: As for an update on the project, the...