Sorry,
I must have specified that it is for a ENV center diff, not a Moss.
Thanks
Search found 75 matches
- Sun Oct 23, 2022 5:08 am
- Forum: Pre-War
- Topic: Nine Crown Wheel bolts torque
- Replies: 1
- Views: 7115
- Sat Oct 22, 2022 11:47 pm
- Forum: Pre-War
- Topic: Nine Crown Wheel bolts torque
- Replies: 1
- Views: 7115
Nine Crown Wheel bolts torque
Hi gents,
Would you know the torque number used for the crown wheel bolts, on a Nine sport differential ?
I know that you need to fit some cotter pins but....
Thanks in advance.
Would you know the torque number used for the crown wheel bolts, on a Nine sport differential ?
I know that you need to fit some cotter pins but....
Thanks in advance.
- Thu Feb 17, 2022 11:51 pm
- Forum: Pre-War
- Topic: Singer Nine/Bantam brakes
- Replies: 7
- Views: 30454
Re: Singer Nine/Bantam brakes
I should have said that the diameter of the brakes is 8" . And from the info I have received it is no 8" on Singers Nine, they are 10" and bigger on 1.5 liter. So ! Not sure where they come from . Anyway, I have 10" brakes in stock, then I will use the front as the 10" backi...
- Wed Feb 16, 2022 10:54 am
- Forum: Pre-War
- Topic: Singer Nine/Bantam brakes
- Replies: 7
- Views: 30454
Re: Singer Nine/Bantam brakes
Thanks Trevor, And thanks to you too Brian, no doubt that I will print that drawing.
- Tue Feb 15, 2022 11:46 pm
- Forum: Pre-War
- Topic: Singer Nine/Bantam brakes
- Replies: 7
- Views: 30454
Re: Singer Nine/Bantam brakes
Thanks a lot for the picture, but unfortunately they are not the same. Here are my type of shoes.
- Tue Feb 15, 2022 7:49 am
- Forum: Pre-War
- Topic: Singer Nine/Bantam brakes
- Replies: 7
- Views: 30454
Singer Nine/Bantam brakes
Hi Gents, Would you have per chance pictures or drawings of brake assembly ? I try to re assemble my front and rear brakes from bits and pieces. And as some parts are missing or worn out it would be good to have some ways of knowing what goes where . Cannot find much online. I am a bit stumped at th...
- Sat Dec 11, 2021 11:07 am
- Forum: Pre-War
- Topic: The Restoration of AYW709
- Replies: 143
- Views: 1420445
Re: The Restoration of AYW709
I am eager to see the way you will tackle the bronze fuel cap, I bought one as well but I don't know where to start.
- Fri Dec 10, 2021 8:25 am
- Forum: Pre-War
- Topic: Counter balanced crankshaft oil plugs
- Replies: 8
- Views: 17106
Re: Counter balanced crankshaft oil plugs
The last plug was the hardest, I had to use my TIG instead of MIG to weld the screwdriver onto that :twisted: :twisted: plug. Matter of fact I would recommend to use a TIG to remove them, for some reasons on two plugs it was really difficult to weld onto. Anyway I am glad to have been able to remove...
- Thu Dec 09, 2021 11:39 am
- Forum: Pre-War
- Topic: Counter balanced crankshaft oil plugs
- Replies: 8
- Views: 17106
Re: Counter balanced crankshaft oil plugs
Brian, save the bit of your impact driver. You will not move the plugs but twist the bit badly.
- Thu Dec 09, 2021 11:36 am
- Forum: Pre-War
- Topic: Counter balanced crankshaft oil plugs
- Replies: 8
- Views: 17106
Re: Counter balanced crankshaft oil plugs
I went a different way to remove the plugs, by welding a nut and using the heat to undo the plug. Worked quite alright after several failed attempts. 20211209_093046 - Copy.jpg 20211209_095834 - Copy.jpg This one gave me some grief ! 20211209_155814 - Copy.jpg And I removed this from pin #2 !! 20211...
- Wed Dec 08, 2021 11:35 am
- Forum: Pre-War
- Topic: Counter balanced crankshaft oil plugs
- Replies: 8
- Views: 17106
Re: Counter balanced crankshaft oil plugs
Well? I am in situation where the ports are plugged by hard old sludge/debris/corrosion. I try to prod them with steel wire and anything that I can fit in but to a certain deep and as port change direction. Used toluene and other toxic product but... So it is a bit of damned if you do and damned if ...
- Tue Dec 07, 2021 3:35 am
- Forum: Pre-War
- Topic: Counter balanced crankshaft oil plugs
- Replies: 8
- Views: 17106
Counter balanced crankshaft oil plugs
Hi Gents, Did you ever try to remove/undo , the oil plugs and oil pipes on a counter balanced crank ?? Because even by removing the punch point and applying some light heat on a plug, resulted on a twisted screwdriver bit, and a slightly damaged plug . Any help, as usual, will be really appreciated....
- Wed Nov 17, 2021 11:46 pm
- Forum: Pre-War
- Topic: Singer Le mans Slot Car by George Turner
- Replies: 7
- Views: 9154
Re: Singer Le mans Slot Car by George Turner
Definitely lot a hours spent on that setup ! Bravo !
- Wed Nov 17, 2021 8:51 am
- Forum: Pre-War
- Topic: Valve springs
- Replies: 2
- Views: 21015
Re: Valve springs
Yes Bill, this is the one I have.
Apparently no one bother to check them !
Apparently no one bother to check them !
- Sun Nov 14, 2021 11:16 am
- Forum: Pre-War
- Topic: Valve springs
- Replies: 2
- Views: 21015
Valve springs
Did you have ever checked the rate of the valve springs when you rebuilt your engine (s) ? I did checked mine, and my results are far from the values of the manual. I have some specs for a 1936/38 9Hp , and 1938 10Hp who are: Spring in engine , valve closed , spring compressed to the height of 1.442...